Month: October 2020

  TINACloud יצירה וניתוח של מעגלים בטאבלטים עם

.TINACloud עם iPad – בסרטון הדרכה זה נדגים כיצד ליצור ולנתח מעגל ב

 .התהליך דומה מאוד בטאבלטים מבוססי אנדרואיד

In this video we create a circuit and then describe how to edit with your finger but editing with a stylus is very similar.

On the iPad you can use pinch to zoom in and out, like you pinch to zoom your photos on your phone or tablet.

After the circuit is complete we will test it by AC Analysis. We set the frequency range, and then tap the Run button. Several diagrams will be generated including Amplitude, Phase, Nyquist, Group Delay and Bode Diagrams.

Click  here  to watch our tutorial video with Hebrew voice-over and subtitles and learn more.

You can learn more about TINA here: www.tina.com

You can learn more about TINACloud here: www.tinacloud.com

In this tutorial we will demonstrate how to create a Laser Driver circuit with a negative voltage supply using the Spice model of the OPA569 operation amplifier.

First, we will create the circuit like the one on this sample schematic:

As it can be seen, we will use 3 Resistors, 3 Capacitors, 2 Diodes, a Voltage Generator, a Battery, a Current Arrow and of course some Grounds.

Some of the components need to be rotated. We will show how to rotate components before or after they are placed on the schematic editor window.

Next, we will present how to set the default component values.

After the circuit is complete we will test the circuit by running Transient, AC analysis and finally DC analysis.

We will also add one of the diagrams and a title to the circuit.

To learn more watch our tutorial video.

You can learn more about TINA here: www.tina.com

You can learn more about TINACloud here: www.tinacloud.com